1/72 Resin + PE-conversions

Instrument Bezels 1/72
TOP
Instrument Bezels 1/72
Super detailed photo-etched Instrument Bezels german Luftwaffe WW 2

15 Sets containing 17 different Instruments... Very well detailed for your perfect self-made Instrument panels.

...also usable for Instrument panels of every other non german aircraft.

NEW 2009
8,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe WW II wheel chocks
TOP
Luftwaffe WW II wheel chocks
Photo-etched wheel chocks german Luftwaffe WW 2
 
 3 pair of different wheel chocks in differnt sizes used by the german Luftwaffe in WW 2.
 
 ...also used by allied airforce.

NEW 2011
6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 1,10 m Luftwaffe WW II
Axle Stands 1,10 m Luftwaffe WW II
Photo-etched axle stands with resin parts, brass and plastic tubes and stripes. Set contains two axle stands and additionaly two wheel chocks.

used by the german Luftwaffe

1,10 Meter original high version scaled down to 1/72 scale.

Mostly used below wings or fuselage


(note also offered airmodel axle stands 1,50 m version ItemNumber AM-6006)

NEW 04/2011
9,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 1,50 m Luftwaffe WW II
Axle Stands 1,50 m Luftwaffe WW II
Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe

1,50 Meter original high version scaled down to 1/72 scale.

Mostly used for lifting tail fuselage and for bigger airplanes wings


(note also offered airmodel axle stands 1,10 m version ItemNumber AM-6005)

NEW 04/2011
9,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe Seatbelt Buckles 1/72
Luftwaffe Seatbelt Buckles 1/72
Photo-etched Seatbelt Buckles german Luftwaffe WW 2
 
Set contains 11 pair seatbelt Buckles. Use 0,9 mm masking tape stripes and create flexible, nicely detailed Seatbelts for your kit.
 
 ...also useable for allied airforce Seats

NEW 04/2011  End of 2012 completely revised and corrected !

 
6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=1,20 1/72
Workshop Ladder h=1,20 1/72
Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=1,20 m version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 2,00 m version of a workshop ladder AM-6023)
(please note also airmodels 2,50 m version of a workshop scaffold ladder AM-6039)

NEW 09/2011
9,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
JUMO 004 engine intake covers vers 1 1/72
JUMO 004 engine intake covers vers 1 1/72
Photo-etched JUMO 004 engine intake covers version 1

..protects your JUMO 004 from damages... so use airmodels engine intake covers!
4,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Me 262 V056 Nightfighter Testbed conv 1/72
Me 262 V056 Nightfighter Testbed conv 1/72
Conversion kit contains:
  • Photo-Etched parts
  • Decals
This kit enables you to build 4 different Stages of one of the most known Me 262 prototypes.

NEU 11/2016
7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 F-8 WGr. 28/32 conv. 1/72
Fw 190 F-8 WGr. 28/32 conv. 1/72
Resin / PhotoEtched Conversion Set

Converts your / any Focke Wulf Fw 190 F-8 to Fw 190 with "grenades-launcher"  WGr 28/32


These four grenades were mounted experimentaly under a Fw 190 F-8 wing four attacking tanks.

NEW 09/2012
7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 F-8 SG 113 Foerstersonde conv. 1/72
Fw 190 F-8 SG 113 Foerstersonde conv. 1/72
Resin Conversion Set

Converts your / any Focke Wulf Fw 190 F-8 with 4   75 mm SG 113A  "Förstersonde" (Forester Probe) recoilles guns.

This "Sondergerät" SG 113 was tested in September 1944 for anti-tank fight.

NEW 09/2011
6,40 EUR
VAT exempt according to current tax regulations excl. Shipping costs
JUMO 004 engine intake covers vers 2 1/72
JUMO 004 engine intake covers vers 2 1/72
Photo-etched JUMO 004 engine intake covers version 2

..protects your JUMO 004 from damages... so use airmodels engine intake covers!


3,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Anti-Slip Mats 1/72
Anti-Slip Mats 1/72
Photo-etched

Anti-Slip Mat set ...  Also protects your airplane from footprints and dirt:

NEW 20011
3,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Remove Before Flight Tags 1/72
Remove Before Flight Tags 1/72
Photo-etched

Several Sets of 24"x 3" and 36" x 3 " Remove before flight tags. Absolutely necessarily needed from your maintanance crew.

NEW 04/2012
4,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 1 bouncing bomb 1/72
SB 800 RS Kurt vers. 1 bouncing bomb 1/72
Complete Kit Resin + Photo Etched Parts

The development of this SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions (see also also offered Vers.2, AM-2017). The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.

NEW 09/2011
6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 1 + Transport Trolley 1/72
SB 800 RS Kurt vers. 1 + Transport Trolley 1/72
Complete Resin + Photo Etched Kit

SB 800 RS "Kurt" Vers 1. bouncing Bomb + Transport Trolley

The development of this SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions.

Reference Source:     inter alia   "German Secret Weapons 1939-1945"; Fritz Hahn, Page 287 et seq

NEW 07/2014
12,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 2+3 bouncing bomb 1/72
SB 800 RS Kurt vers. 2+3 bouncing bomb 1/72
Complete Kit Resin + Photo Etched Parts

The development of this SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions (see also also offered Vers.1, AM-2016). The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.


This kit enables you to build two different versions (small and larger sized Tail-box... see pictures)


NEW 09/2011
6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 2+3 + Transport Trolley 1/72
SB 800 RS Kurt vers. 2+3 + Transport Trolley 1/72
Complete Resin + Photo Etched Kit

SB 800 RS "Kurt" Vers 2 and 3 bouncing Bomb + Transport Trolley

The development of this SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions.

This kit enables you to build two different versions (small and larger sized Tail-box... see pictures)

Reference Source:     inter alia   "German Secret Weapons 1939-1945"; Fritz Hahn, Page 287 et seq

NEW 07/2014
12,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8 R6 SPECIAL EDITION W.Gr 21 conv. + Decals 1/72
Fw 190 A-8 R6 SPECIAL EDITION W.Gr 21 conv. + Decals 1/72
Airmodel Special edition:  Resin & Photo-Etched conversion set for Fw 190 A-8 R6 with W.Gr 21 + Decals "Snakesquadron"

...contains Airmodels AM-6018 W.Gr. 21 conversion kit combined with decals of Fw R. Hartkopfs Focke Wulf Fw 190 A-8 of JGr 10, Parchim 1944

NEU 07/2013
9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
W.Gr 21 cm for Bf 109 / Fw 190 conv. 1/72
W.Gr 21 cm for Bf 109 / Fw 190 conv. 1/72
Resin & Photo-Etched Conversion Set

Converts your Focke Wulf Fw 190 or Messerschmitt Bf 109 (R6 / BR21).

This kit contains extra strong photoetched brass mountings (0,3 mm instead usualy 0,16 mm) and also a special bending tool.

Also can be mounted modified below wings of  Me 110, 210 and 410 or below fuselage of Me 262.

NEW 04/2012
6,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 G-2 JaBo Rei conv. 1/72
Fw 190 G-2 JaBo Rei conv. 1/72
Resin Conversion Set

Converts your / any Focke Wulf Fw 190 kit above A-5 to a G-2 and increases the range of your aircraft.


This kit contains extra strong photoetched mountings (0,3 mm instead usualy 0,16 mm) and both 300 l fueltanks.

Also can be mounted below wings of  Me 109´s, Me 110´s and Ju 87´s.


NEW 09/2011
6,40 EUR
VAT exempt according to current tax regulations excl. Shipping costs
German Luftwaffe ammunition & boxes 1/72
German Luftwaffe ammunition & boxes 1/72
Photo-etched

Your kit still has no ammunition? Than you need airmodels German Luftwaffe ammunition & boxes
  • 1 x 13mm ammunition and box (MG 131)
  • 1 x 20mm ammunition and box (MG 151/20)
  • 1 x 30mm ammunition and box (Mk 103 and Mk 108)

NEW 04/2012
5,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Rammjaeger Fw 190 A-6 / R7 A-8 / R2 conv. 1/72
Rammjaeger Fw 190 A-6 / R7 A-8 / R2 conv. 1/72
Photo-Etched Conversion Set

This kit converts your Fw 190 A  into a special  Fw 190 A-6 / R 7 A-8 / R2 "Rammjaeger", or also called "Sturmbock" version.


The kit contains different windshield armor especially for Academy / Hobby Boss or Revell / Hasegawa canopies
4,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8 SPECIAL EDITION Rammjaeger + Krebsgeraet + Decals conv. 1/72
Fw 190 A-8 SPECIAL EDITION Rammjaeger + Krebsgeraet + Decals conv. 1/72
Special edition:   Resin & Photo-Etched Conversion Set for "Rammjäger & Krebsgerät" + Decals 

...contains Airmodels AM-6021 "Rammjäger" and AM-6025 "Krebsgerät" conversion kits combined with decals of Fw O. Baischs Focke Wulf Fw 190 A-8 of 12/JG-3

NEW 05/2013
9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 0,90 m Luftwaffe WW II
Axle Stands 0,90 m Luftwaffe WW II
Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe
0,9 Meter original high version scaled down to 1/72 scale.

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

NEW 04/2012


7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=2,00 1/72
TOP
Workshop Ladder h=2,00 1/72
Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=2,00 m version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 1,20 m version of a workshop ladder AM-6008)
(please note also airmodels 2,50 m version of a workshop scaffold ladder AM-6039)

NEW 04/2012



 
9,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Bf 109 G-6 Neptun FuG 217 conv. 1/72
Bf 109 G-6 Neptun FuG 217 conv. 1/72
Photo-Etched Conversion Set + DECALS

This kit converts your Bf 109 G-6 into a nightfighter version with FuG 217 called "Neptun"

NEW 04/2013
5,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8 "Krebsgeraet" W.Gr 21 cm conv. 1/72
Fw 190 A-8 "Krebsgeraet" W.Gr 21 cm conv. 1/72
Resin & Photo-Etched Conversion Set

This kit converts your Fw 190 A in special Bomberpulkzerstörer Fw 190 A-8 with single, backward-firing grenade launcher W.Gr 21 cm "Krebsgeraet" (roughly translated to grab device or unit)

NEW 04/2013
5,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Bf 109 G-6/N Naxos FuG 350 conv. 1/72
Bf 109 G-6/N Naxos FuG 350 conv. 1/72
Conversion kit contains:
  • Photo-etched parts
  • Resin parts
  • Vacuumformed canopy
  • Decals
 This kit converts your Bf 109 G-6 into a nightfighter version with FuG 350 called "Naxos"

 NEW 11/2015
7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A/F/G SuperdetailSet 1/72
TOP
Fw 190 A/F/G SuperdetailSet 1/72
Photoetched Conversion Set

This kit converts your / each Fw 190 A / F / G kit into a small gem.

Show your kit with many opened hatches and access Panels.

NEW 04/2013
8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe Liegestuhl / Deckchair 1/72
TOP
Luftwaffe Liegestuhl / Deckchair 1/72
Photo-etched kit ...special thicker brass-sheet more realistic (d=0,3 m)

Let your pilots and staff personal rest a little bit. Offer them this little kit!

NEW 04/2013
2,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
1 to 30 (from a total of 87)