Main page » Airmodel Kits » 1/72 Airfield Accessories » Axle Stands 1,50 m Luftwaffe WW II

Preview: Axle Stands 1,50 m Luftwaffe WW II

Axle Stands 1,50 m Luftwaffe WW II

Mobile Preview: Axle Stands 1,50 m Luftwaffe WW II

Axle Stands 1,50 m Luftwaffe WW II

Product No.:: AM-6006
Stock:: pieces

9,90 EUR

VAT exempt according to current tax regulations excl. Shipping costs

Description

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe

1,50 Meter original high version scaled down to 1/72 scale.

Mostly used for lifting tail fuselage and for bigger airplanes wings

(note also offered airmodel axle stands 1,10 m version ItemNumber AM-6005)

NEW 04/2011

Customer reviews

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Workshop Ladder h=1,20 1/72

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high h=1,20 m version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 2,00 m version of a workshop ladder AM-6023)
(please note also airmodels 2,50 m version of a workshop scaffold ladder AM-6039)

NEW 09/2011

9,50 EUR

Luftwaffe WW II wheel chocks

Photo-etched wheel chocks german Luftwaffe WW 2

3 pair of different wheel chocks in differnt sizes used by the german Luftwaffe in WW 2.

...also used by allied airforce.

NEW 2011

6,90 EUR

Focke Wulf Fw 190 A/F/G Gun calibration...

Photo-etched kit

Your MG and MKs of your aircraft have to be recalibrated after maintenance? Then you need airmodels photoetched "gun calibration disk" kit. This kit contains:

Photoetched parts

For synchronization of the MG's attached to the fuselage and wing root you need a so-called "Auswanderungsscheibe" (gun calibration disk). For this purpose, the guns are fired through the "Auswanderungsscheibe" attached to the propeller hub while the engine is running and the guns are synchronized with the engine according to the shot pattern on the disk.

NEW 08/2022

7,90 EUR

Axle Stands 1,10 m Luftwaffe WW II

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes. Set contains two axle stands and additionaly two wheel chocks.

used by the german Luftwaffe

1,10 Meter original high version scaled down to 1/72 scale.

Mostly used below wings or fuselage

(note also offered airmodel axle stands 1,50 m version ItemNumber AM-6006)

NEW 04/2011

9,90 EUR