Shopping Cart
no products

1/48 Resin + PE-conversions


  

Page:  1 

Instrument Bezels 1/48

AZ-48001 Instrument Bezels 1/48

Super detailed photo-etched Instrument Bezels german Luftwaffe WW 2

9 Sets containing 17 different Instruments each... Very well detailed for your perfect self-made Instrument panels.

...also usable for Instrument panels of every other non german aircraft.

NEW 2012

8,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
German Lw Seatbelts 1/48

AZ-48002 German Lw Seatbelts 1/48

Super detailed photo-etched Seatbelts german Luftwaffe WW 2

containing 9 Sets of very well detailed seatbelts.

...also usable for other non german aircraft.

NEW 2012

7,00 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe WW II wheel chocks  1/48

AZ-48004 Luftwaffe WW II wheel chocks 1/48

Photo-etched wheel chocks german Luftwaffe WW 2
 
  2 pair of different wheel chocks in differnt sizes used by the german Luftwaffe in WW 2.
 
 ...also used by allied airforce.

NEW 2012

6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 1,10 m Luftwaffe WW II  1/48

AZ-48005 Axle Stands 1,10 m Luftwaffe WW II 1/48

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe

1,10 Meter original high version scaled down to 1/48 scale.

Mostly used below wings or fuselage


(note also offered airmodel axle stands 1,50 m version ItemNumber AZ-48006)

NEW 2012


13,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 1,50 m Luftwaffe WW II  1/48

AZ-48006 Axle Stands 1,50 m Luftwaffe WW II 1/48

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe

1,50 Meter original high version scaled down to 1/48 scale.

Mostly used for lifting tail fuselage and for bigger airplanes wings


(note also offered airmodel axle stands 1,10 m version ItemNumber AZ-48005)

NEW 04/2012

13,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe Seatbelt Buckles 1/48

AZ-48007 Luftwaffe Seatbelt Buckles 1/48

Photo-etched Seatbelt Buckles german Luftwaffe WW 2
 
Set contains 9 pair seatbelt Buckles. Use 1,2 mm masking tape stripes and create flexible, nicely detailed Seatbelts for your kit.
 
 ...also useable for allied airforce Seats

NEW 04/2012

5,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=1,20  1/48

AZ-48008 Workshop Ladder h=1,20 1/48

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=1,20 m
version scaled down to 1/48 scale.

used f.e. by the german Luftwaffe

NEW 03/2013






13,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
JUMO 004 engine intake covers vers 1 1/48

AZ-48009 JUMO 004 engine intake covers vers 1 1/48

Photo-etched JUMO 004 engine intake covers version 1

..protects your JUMO 004 from damages... so use airmodels engine intake covers!

NEW 03/2013

6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 F-8  SG 113  Foerstersonde  conv. 1/48

AZ-48012 Fw 190 F-8 SG 113 Foerstersonde conv. 1/48

Resin Conversion Set

Converts your / any Focke Wulf Fw 190 F-8 with 4   75 mm SG 113A  "Förstersonde" (Forester Probe) recoilles guns.

This "Sondergerät" SG 113 was tested in September 1944 for anti-tank fight.


NEW 03/2013

6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
JUMO 004 engine intake covers vers 2 1/48

AZ-48013 JUMO 004 engine intake covers vers 2 1/48

Photo-etched JUMO 004 engine intake covers version 2

..protects your JUMO 004 from damages... so use airmodels engine intake covers!

NEW 03/2013

4,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 1 bouncing bomb  conv. 1/48

AZ-48016 SB 800 RS Kurt vers. 1 bouncing bomb conv. 1/48

Resin Conversion Set + Photo Etched Parts

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions (see also also offered Vers.2, AZ-48017). The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.

NEW 03/2013

8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 2 bouncing bomb  conv. 1/48

AZ-48017 SB 800 RS Kurt vers. 2 bouncing bomb conv. 1/48

Resin Conversion Set + Photo Etched Parts

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions. The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.


This kit enables you to build two different versions (small and larger sized Teil-box... see pictures)


NEW 03/2013

8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=2,00  1/48

AZ-48023 Workshop Ladder h=2,00 1/48

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=2,00 m
version scaled down to 1/48 scale.

used f.e. by the german Luftwaffe


(please note also airmodels 1,20 m version of a workshop ladder AZ-48008)

NEW 03/2013



14,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Bf 109 G-6   Neptun  FuG 217  conv. 1/48

AZ-48024 Bf 109 G-6 Neptun FuG 217 conv. 1/48

Photo-Etched Conversion Set + DECALS

This kit converts your Bf 109 G-6 into a nightfighter version with FuG 217 called "Neptun"

NEW 11/2017


8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=0,90 m  1/48

AZ-48036 Workshop Ladder h=0,90 m 1/48

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=0,90 m
version scaled down to 1/48 scale.

used f.e. by the german Luftwaffe


(please note also airmodels 1,20 m version of a workshop ladder AZ-48008)
(please note also airmodels 2,00 m version of a workshop ladder AZ-48023)


NEW 12/2016


9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Scaffold Ladder h<2,00  1/48

AZ-48039 Scaffold Ladder h<2,00 1/48

Photo-etched Workshop Scaffold Ladder...special thicker brass-sheet more realistic (d=0,3 m)
Real wooden timber planks!


With its aymmetrical steps you can mount the planks in any necessarry working high.

Original high up to 2,50 m scaled down to 1/48/ scale.

The planks also are lasered from real wood.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AZ-48036)
(please note also airmodels 1,20 m version of a workshop ladder AZ-48008)
(please note also airmodels 2,00 m version of a workshop ladder AZ-48023)

NEW 11/2017

14,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Tail Wheel Towbar    3 Sets  1/48

AZ-48041 Tail Wheel Towbar 3 Sets 1/48

3 Sets        of photo-etched   Tail Wheel Towbars
(special thicker brass-sheet more realistic (d=0,3 m))

You can build 3 different Tail wheel towbars which enable you to tow your model aircrafts.

used f.e. by the german Luftwaffe, but also by any other nation in Ww2 or later.

NEW 11/2017

8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
1/48  "Tripod" Field-mounted crane Lw. WW 2   SET 1

AZ-48501/1 1/48 "Tripod" Field-mounted crane Lw. WW 2 SET 1

Field-mounted crane (heavy version) of the german Luftwaffe in WW 2 in scale 1/48.

For every maintenance work on verhicles (Aircraft/Cars) 

SET 1                             complete but without engine or box

NEW 03/2013


16,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
  

Page:  1 

Show 1 to 18 (from a total of 18 products)