Shopping Cart
no products

NEW KITS 1/72

Here you can find some Airmodel New Kits in scale 1/72 from the last view months.

.... all other offered airmodel kits can be found in subcategories under "
Airmodel Kits"
  

Page:  1  2  [>>] 

Workshop Ladder h=1,20  1/72

AM-6008 Workshop Ladder h=1,20 1/72

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=1,20 m
version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 2,00 m version of a workshop ladder AM-6023)

(please note also airmodels 2,50 m version of a workshop scaffold ladder AM-6039)

NEW 09/2011




9,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Me 262 V056 Nightfighter Testbed conv  1/72

AM-6010 Me 262 V056 Nightfighter Testbed conv 1/72

Conversion kit contains:

  • Photo-Etched parts
  • Decals
This kit enables you to build 4 different Stages of one of the most known Me 262 prototypes.

NEU 11/2016


7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 F-8  WGr. 28/32  conv. 1/72

AM-6011 Fw 190 F-8 WGr. 28/32 conv. 1/72

Resin / PhotoEtched Conversion Set

Converts your / any Focke Wulf Fw 190 F-8 to Fw 190 with "grenades-launcher"  WGr 28/32


These four grenades were mounted experimentaly under a Fw 190 F-8 wing four attacking tanks.

NEW 09/2012


7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 1 bouncing bomb  1/72

AM-6016 SB 800 RS Kurt vers. 1 bouncing bomb 1/72

Complete Kit Resin + Photo Etched Parts

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions (see also also offered Vers.2, AM-2017). The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.

NEW 09/2011


6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 1 + Transport Trolley 1/72

AM-6016-31 SB 800 RS Kurt vers. 1 + Transport Trolley 1/72

Complete Resin + Photo Etched Kit

SB 800 RS "Kurt" Vers 1. bouncing Bomb + Transport Trolley

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions.

Reference Source:     inter alia   "German Secret Weapons 1939-1945"; Fritz Hahn, Page 287 et seq

NEW 07/2014

12,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 2+3 bouncing bomb 1/72

AM-6017 SB 800 RS Kurt vers. 2+3 bouncing bomb 1/72

Complete Kit Resin + Photo Etched Parts

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions (see also also offered Vers.1, AM-2016). The first test had been done  without the rocket propulsion engine and were not very satisfactory, since the impact speed was quite low. The later test were more satisfying, but the tests had been stopped in August 1944 for some reason. The bullet could bee accelerated by the rocket engine within 3 seconds to a speed of 330 m/sec. At the same time still in air the ball was seperated from the rocket engine. The bouncing bombe reached a speed range of 4500 meters.


This kit enables you to build two different versions (small and larger sized Tail-box... see pictures)


NEW 09/2011


6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
SB 800 RS Kurt vers. 2+3 + Transport Trolley 1/72

AM-6017-31 SB 800 RS Kurt vers. 2+3 + Transport Trolley 1/72

Complete Resin + Photo Etched Kit

SB 800 RS "Kurt" Vers 2 and 3 bouncing Bomb + Transport Trolley

The development of this
SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions.

This kit enables you to build two different versions (small and larger sized Tail-box... see pictures)

Reference Source:     inter alia   "German Secret Weapons 1939-1945"; Fritz Hahn, Page 287 et seq

NEW 07/2014

12,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8 R6  SPECIAL EDITION  W.Gr 21 conv. + Decals 1/72

AM-6018-D Fw 190 A-8 R6 SPECIAL EDITION W.Gr 21 conv. + Decals 1/72

Airmodel Special edition:  Resin & Photo-Etched conversion set for Fw 190 A-8 R6 with W.Gr 21 + Decals "Snakesquadron"

...contains Airmodels AM-6018 W.Gr. 21 conversion kit combined with decals of Fw R. Hartkopfs Focke Wulf Fw 190 A-8 of JGr 10, Parchim 1944


NEU 07/2013

9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
German Luftwaffe ammunition & boxes   1/72

AM-6020 German Luftwaffe ammunition & boxes 1/72

Photo-etched

Your kit still has no ammunition? Than you need airmodels German Luftwaffe ammunition & boxes

  • 1 x 13mm ammunition and box (MG 131)
  • 1 x 20mm ammunition and box (MG 151/20)
  • 1 x 30mm ammunition and box (Mk 103 and Mk 108)

NEW 04/2012

5,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Rammjaeger  Fw 190 A-6 / R7   A-8 / R2  conv. 1/72

AM-6021 Rammjaeger Fw 190 A-6 / R7 A-8 / R2 conv. 1/72

Photo-Etched Conversion Set

This kit
converts your Fw 190 A  into a special  Fw 190 A-6 / R 7 A-8 / R2 "Rammjaeger", or also called "Sturmbock" version.


The kit contains different windshield armor especially for Academy / Hobby Boss or Revell / Hasegawa canopies

4,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8  SPECIAL EDITION  Rammjaeger + Krebsgeraet + Decals  conv. 1/72

AM-6021-25 Fw 190 A-8 SPECIAL EDITION Rammjaeger + Krebsgeraet + Decals conv. 1/72

Special edition:   Resin & Photo-Etched Conversion Set for "Rammjäger & Krebsgerät" + Decals 

...contains Airmodels AM-6021 "Rammjäger" and AM-6025 "Krebsgerät" conversion kits combined with decals of Fw O. Baischs Focke Wulf Fw 190 A-8 of 12/JG-3

NEW 05/2013




9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Axle Stands 0,90 m Luftwaffe WW II

AM-6022 Axle Stands 0,90 m Luftwaffe WW II

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

used by the german Luftwaffe
0,9 Meter original high version scaled down to 1/72 scale.

Photo-etched axle stands with resin parts, brass and plastic tubes and stripes

NEW 04/2012



7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=2,00  1/72

AM-6023 Workshop Ladder h=2,00 1/72

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=2,00 m
version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 1,20 m version of a workshop ladder AM-6008)

(please note also airmodels 2,50 m version of a workshop scaffold ladder AM-6039)


NEW 04/2012





9,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Bf 109 G-6   Neptun  FuG 217  conv. 1/72

AM-6024 Bf 109 G-6 Neptun FuG 217 conv. 1/72

Photo-Etched Conversion Set + DECALS

This kit converts your Bf 109 G-6 into a nightfighter version with FuG 217 called "Neptun"

NEW 04/2013


5,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A-8 "Krebsgeraet" W.Gr 21 cm  conv. 1/72

AM-6025 Fw 190 A-8 "Krebsgeraet" W.Gr 21 cm conv. 1/72

Resin & Photo-Etched Conversion Set

This kit converts your Fw 190 A in special Bomberpulkzerstörer Fw 190 A-8 with single, backward-firing grenade launcher W.Gr 21 cm "Krebsgeraet" (roughly translated to grab device or unit)

NEW 04/2013



5,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Bf 109 G-6/N  Naxos  FuG 350  conv. 1/72

AM-6026 Bf 109 G-6/N Naxos FuG 350 conv. 1/72

Conversion kit contains:

  • Photo-etched parts
  • Resin parts
  • Vacuumformed canopy
  • Decals
This kit converts your Bf 109 G-6 into a nightfighter version with FuG 350 called "Naxos"

NEW 11/2015


7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A/F/G   SuperdetailSet   1/72

AM-6027 Fw 190 A/F/G SuperdetailSet 1/72

Photoetched Conversion Set

This kit converts your / each Fw 190 A / F / G kit into a small gem.

Show your kit with many opened hatches and access Panels.


NEW 04/2013

8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Luftwaffe Liegestuhl / Deckchair  1/72

AM-6028 Luftwaffe Liegestuhl / Deckchair 1/72

Photo-etched kit ...special thicker brass-sheet more realistic (d=0,3 m)

Let your pilots and staff personal rest a little bit. Offer them this little kit!

NEW 04/2013






2,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Transport trolley for DB 601 engines

AM-6030 Transport trolley for DB 601 engines

Complete Photo-Etched kit:

Transport Trolley for
DB 601 engines

Attention:               Kit only contains the Transport trolley !!!
Transport trolley and Engine available under ItemNo.AZ-72003/3

NEW 01/2014




6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Transport Trolley for SB 800 RS Kurt  1/72

AM-6031 Transport Trolley for SB 800 RS Kurt 1/72

Transport Trolley for SB 800 RS "Kurt" complete Photo-Etched kit

ATTENTION:                                        Kit only contains the Transport trolley !!!
Transport trolley and SB 800 RS kits available under ItemNo. AM-6013/31 AM-6017/31

NEW 07/2014

The development of this SB 800 RS "Kurt" bouncing bombs against ship targets begun in the autumn of 1943. The few available informations reporting about many successful bombings in several different versions.
Not reported in service.


Reference Source:     inter alia   "German Secret Weapons 1939-1945"; Fritz Hahn, Page 287 et seq


6,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 F-8/U3  Bombentorpedo BT 1400 conv  1/72

AM-6033 Fw 190 F-8/U3 Bombentorpedo BT 1400 conv 1/72

Conversion kit contains:

  • Photo-Etched parts   (incl FuG 101)
  • Resin Parts
  • Decals

Convertes any 1/72 scale Fw 190 A-8 into Fw 190 F-8/U3  fitted with Bombentorpedo BT 1400.

NEU 11/2015


9,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Workshop Ladder h=0,90  1/72

AM-6036 Workshop Ladder h=0,90 1/72

Photo-etched Workshop Ladder...special thicker brass-sheet more realistic (d=0,3 m)

Original high  h=0,90 m
version scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

NEW 12/2015




7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Scaffold Ladder h<2,00  1/72

AM-6039 Scaffold Ladder h<2,00 1/72

Photo-etched Workshop Scaffold Ladder...special thicker brass-sheet more realistic (d=0,3 m)

With its aymmetrical steps you can mount the planks in any necessarry working high.

Original high up to 2,50 m scaled down to 1/72 scale.

used f.e. by the german Luftwaffe

(please note also airmodels 0,90 m version of a workshop ladder AM-6036)
(please note also airmodels 1,20 m version of a workshop ladder AM-6008)
(please note also airmodels 2,00 m version of a workshop ladder AM-6023)

NEW 12/2015



9,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Welding Equipment & Trolley WW 2     1/72

AM-6040 Welding Equipment & Trolley WW 2 1/72

Complete kit contains:

  • Photo-etched parts (special thicker brass-sheet more realistic (d=0,3 m))
  • Resin parts
  • rubber wheels

Oxy-acetylene welding Equipment & Trolley of the german Luftwaffe in WW 2 in scale 1/72.

Does your plane needs maintenance repairs? Anything needs to be welded? Then you need this kit! A nice "plus" for any diorama.

NEW 12/2015


8,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Tail Wheel Towbar    3 Sets  1/72

AM-6041 Tail Wheel Towbar 3 Sets 1/72

3 Sets        of photo-etched   Tail Wheel Towbars
(special thicker brass-sheet more realistic (d=0,3 m))

You can build 3 different Tail wheel towbars which enable you to tow your model aircrafts.

used f.e. by the german Luftwaffe, but also by any other nation in Ww2 or later.

NEW 12/2015

7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Me 262  Towbar    2 Sets  1/72

AM-6042 Me 262 Towbar 2 Sets 1/72

2 Sets        of photo-etched   Tail Wheel Towbars
(special thicker brass-sheet more realistic (d=0,3 m))

In the early days the Me 262 was towed only by its nose wheel. Later it was released by towing-cables mounted on the main gear after
one discovered serious damages on the Me 262´s nose wheel.

(Kettenkrad and Me 262 not part of this offer)

NEW 12/2016

4,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Me 262 V-9 Acoutsic Probe Testbed conv  1/72

AM-6044 Me 262 V-9 Acoutsic Probe Testbed conv 1/72

Conversion kit contains:

  • Photo-Etched parts [special thicker brass-sheet more realistic (d=0,3 mm)]
  • Decals
This kit enables you to build one of two Me 262 V-9 equiped with these acoustic probes.

NEW 12/2016

7,20 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Fw 190 A/F/G/D  Clear Vac Canopy set 1/72

VA-7001 Fw 190 A/F/G/D Clear Vac Canopy set 1/72

2 VACUUMFORMED CANOPIES

one early and one late Fw 190 Canopy

For REVELL Fw 190 kits mainly.

(Model built by M. Simon / GER)


3,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
Me 262 A/B  Clear Vac Canopy set 1/72

VA-7002 Me 262 A/B Clear Vac Canopy set 1/72

2 VACUUMFORMED CANOPIES

included Resinparts for REVELL kits.

With this Upgrade kit you can improve the aged REVELL Me 262 canopies and replace them.

For REVELL Me 262 recommended.

(Model built by M. Simon / GER)


4,50 EUR
VAT exempt according to current tax regulations excl. Shipping costs
WW 2 Fighter wooden blast pen  1/72  LASERCUT

AM-9014 WW 2 Fighter wooden blast pen 1/72 LASERCUT

LASERCUT wooden panels KIT

Protect your Fighters! For displaying a 1/72 fighter / interceptor

(unpainted, unbuild balsa-wood kit)

Without shown accessorys and aircraft!

(Model built by M. Simon - Airmodel / GER)

11,90 EUR
VAT exempt according to current tax regulations excl. Shipping costs
  

Page:  1  2  [>>] 

Show 1 to 30 (from a total of 40 products)